NEC express5800 A2010b User Manual page 341

Chapter 3 Setup
Edit page
Buttons
① [Apply] button
Apply the edited value and return to List page.
② [Default] button
Set the factory-set value. This value is not applied unless [Apply] button is pressed.
Setting range and default value
Active Directory Authentication
User Domain Name
Timeout
Domain Controller Server Address 1
Domain Controller Server Address 2
Domain Controller Server Address 3
③ [Cancel] button
Return to List page without applying the edited value.
Important
Item name
You cannot use ActiveDirectory and LDAP authentication to login the standby web
console.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
  
Setup value
Enable or disable Active Directory
authentication.
Specify user domain name.
Ex.: sample.com
Specify authentication timeout time.
Allowable values are 15 to 300
(seconds).
Specify address of the first domain
controller server.
Specify address of the second
domain controller server.
Specify address of the third domain
controller server.
7. Using Remote Management
Default setting
Disable
Blank
120
0.0.0.0
0.0.0.0
0.0.0.0
341