NEC express5800 A2010b User Manual page 336

Chapter 3 Setup
(*2) ASCII characters excluding [(space)], ["], [&], [?], [=], [\](backslash), and [#] can be accepted. At least
one character is needed. This password is used for user authentication on web console, SMASH-CLP
(SSH password authentication), and IPMI RMCP+. A password to be set for private key (generated for
SSH public key) can be different from this password.
Buttons
① [Apply] button
Press the [Apply] button to edit user, then return to User List page.
② [Default] button
Press the [Default] button to clear "User Name", "Password", and "Confirm Password" fields.
③ [Cancel] button
Press the [Cancel] button to return to User List page.
Add User page
Pressing the [Add] button opens the Add User page. Setting items are shown below.
Item name
User Name
Password
Confirm Password
Privilege
Public Key for SSH
Registration of Public
Key for SSH
(*1) 1-byte alphanumeric, [-], and [_] can be accepted. Note that [-] cannot be placed at the top of user name.
The character strings "root", "MWA", "Maintenance", and "Administrator" are reserved by BMC. Do not
add or delete these character strings.
(*2) ASCII characters excluding [(space)], ["], [&], [?], [=], [\](backslash), and [#] can be accepted. At least one
character is needed.
336
Specify user name. Up to 15 characters can be accepted. (*1)
Set password. Up to 19 characters can be accepted. (*2)
Enter the same character string as password. (*2)
Specify privilege of the user.
Administrator, Operator, or User can be selected.
Select whether SSH public key is registered or not.
[Register] must be selected to perform public key authentication in SSH.
To register SSH public key, select a file and register the key. This item is
indispensable if you select [Register].
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management
 
Setup value