Product Overview; Specifications - BenQ MP611 Product Service Manual

Product Overview

Specifications

1.0 Optical Performance
1.1 ANSI Brightness
1.2 Brightness Uniformity
1.2.1 ANSI Uniformity
1.2.2 Upper-Down unbalance
1.2.3 Left-Right unbalance
1.3 Contrast Ratio
1.3.1 ANSI Contrast
1.3.2 FOFO Contrast
1.4 Light Leakage
1.4.1 Light Leakage in Active Area
1.4.2 Light Leakage out of Active
Area
1.5 Color
1.5.1 White
1.5.2 Red
1.5.3 Green
1.5.4 Blue
1.6 Color Uniformity
1.6.1 White
1.6.2 Red
1.6.3 Green
1.6.4 Blue
2.0 Image Quality
Tested under 60" (diagonal) image size with Wide projection lens
position unless other specified. Measurement Details refer to
Appendix A. Reference meter : BENQ Factory T10 meter
(SN:M040000850)
Minimum 1920 Lumens
Minimum 50%
0.5~2
0.6~1.67
Minimum 150:1
Minimum 1200:1
<0.5 lux compared to center point within 60" (Diagonal at 2.2m,
Wide) image size. Note: This light leakage in Active area is only
described as the spot light with obvious shape. It is not included
the uniformity difference of the projector for black pattern.
<0.5 lux between of 54" (Diagonal at 2m, Tele) image size and
60" (Diagonal at 2.2m, Wide) image size.
Reference meter: BenQ YM5A/Measurement Center Integral
sphere
X
0.315±0.04
0.630±0.04
0.353±0.04
0.139±0.04
X
0.040
0.040
0.040
0.040
8
Y
0.344±0.04
0.353±0.04
0.535±0.04
0.096±0.04
Y
0.040
0.040
0.040
0.040