Gap; Packing And Marking - BenQ MP611 Product Service Manual

1.1 Gap (refer to C321 document)
ITEMS
Cap between UC and LC；
step between UC and LC
Cap between Autio and RC
Cap between UC and upper side of RC
Cap between UC and both sides of RC
Cap between Video and RC
Cap between LC and RC
Cap between USB and RC
Cap between RC and D-sub out
Cap between IR LENS and RC
Cap between AC socket and RC
Cap between RC and D-sub in
Cap between FC and Ring-FC
Cap between IR LENS and FC
Cap between LENS and Ring-FC
Cap between UC and FC
Cap between PUSH-BTN and LC
Step between FC and UC
Cap between LED LENS and UC
Cap between KEYFUN and UC
Cap between Door and LC；
step between Door and LC

1.2 Packing and marking

Item Description
1 Inner packing material broken.
2 Carton damaged with hole over 1.5 cm in diameter.
3 Carton crashed with dent over 5 cm in diameter.
4 Printing of carton is illegible.
5 Broken packing bag
6 Spec. label's serial number not the same as carton labels.
7 Packing models not the same as carton.
8 Marking missing/wrong.
9 Projector missing (found none in carton).
10 Label on box missing or damaged.
Specification
Gap ≦ 0.5mm，step 0.3mm
Gap ≦ 0.5mm
0.2(+0.3/-0.2)mm
0.1(+0.3/-0.1)mm
0.85(+0.6/-0.6)mm
0.1(+0.3/-0.1)mm
0.5(+0.3/-0.3)mm
1.2(+0.8/-0.8)mm
0.15(+0.2/-0.1)mm
0.25(+0.25/-0.25)mm
1.2(+0.8/-0.8)mm
0.1(+0.1/-0.05)mm
0.15(+0.2/-0.1)mm
1.5(+0.1/-0.1)mm
0.1(+0.3/-0.1)mm
0.3(+0.2/-0.2)mm
0（+0.3/-0.3）mm
0.1（+0.2/-0.1）mm
0.1（+0.2/-0.1）mm
Gap ≦ 0.6mm，step 0.8mm
52
≦
≦
Class
Minor
Minor
Minor
Minor
Minor
Major
Major
Major
Major
Major