Design Verification Test Procedure - BenQ MP611 Product Service Manual

Appendix B
B1. Purpose
This standard establishes the environmental specification for projector related products, which
defines the level of product performance and reliability in the field. It is not necessary the intent of
these specification to simulate a typical user environment, but rather to provide for a level of product
robustness that when applied over a wide range of manufacturing variability and environmental
usage conditions, which is recommended for product assurance testing reference.
B2. Test Summary
B2.1 Dynamic Test
Package Drop
Package Vibration

Design Verification Test Procedure

Specification
Drop test with packing gross weight and falling height relationship
Gross Weight
( Kg )
0.0<W<4.5
4.5≦W<11.0
11.0≦W<20.5
20.5≦W<34.0
34.0≦W<45.5
45.5≦W<79.4
Test Orientation: 1 corner, 3 edges, 6 Faces.
After drop test, no abnormality on function /appearance.
Test condition :
1. Sine wave:
5~200Hz 1.5G, 1 octave/min, 15 min dwell on each resonant
frequency, all primary axis, one sweep 30 minutes/Min. per
orientation, total of 90+ min.
2. Random wave:
5-100Hz,
100-200Hz,
200Hz,
Equivalent to 1.47 Grms, all primary axes, 20 min
per-orientation, total of 60 min.
Note: Perform random vibration test before, the Sine-wave
22
C3/C4/C5
>106
106
91
76
61
46
0dB/Oct. 0.015(g
-6dB/Oct. N/A
N/A 0.0038(g
Falling Height (cm)
spec.
MP Remark
106
91
76
61
46
31
2
/Hz);
2
/Hz)