Usb Support - Win98/Winme Only Installation; Usb Support - Using A Projector For The First Time; Usb Support - Choosing The Usb Interface - BenQ MP611 Product Service Manual

USB Support - Win98/WinMe Only Installation on Windows 98 or Windows Me may prompt
"Please insert the disk labeled 'DLP Composer Installation Directory', and then click OK". This
message may be safely ignored by clicking the OK button. Another prompt will then appear: "The
file 'windrvr6.sys' on DLP Composer Installation Directory cannot be found". Again, click OK
and the installation proceeds without further problems.

USB Support - Using a projector for the first time

After installation is complete, and you plug a DDP2000-based projector into USB for the first
time, Windows will run the "
necessary drivers, accept the recommended choice (let the system find the driver for you) and
click "Next" to complete the installation.
Note: The Windows 98/Me "New Hardware Wizard" may not automatically find the driver. You
should use the "Advanced" option, and enter the directory where the DLP Composer™ Lite Tool
Suite was installed (normally "C:\Program Files\DLP Composer Lite"). The wizard will find the
file "DDP2000.inf" and complete the installation.

USB Support - Choosing the USB interface

To select the USB communications interface, choose "Preferences" from the "Edit" menu, click
the "Communications" page and choose "USB (DDP2000 Only)". You can now use DLP
Composer™ Lite to communicate with a DDP2000-based projector via USB using the Flash
Loader tool.
New Hardware Wizard
73
". When the wizard prompts to find the