Daikin RTSQ20PY1 Service Manual page 163

SiBE31-801_C
3.1.4 Setting Contents and Code No. – VRV Indoor unit
VRV Mode First
system No. code
indoor Note 2 No.
unit
10(20) 0 Filter contamination heavy/
settings
light (Setting for display
time to clean air filter)
(Sets display time to clean
air filter to half when there is
heavy filter contamination.)
1 Long life filter type
2 Room temperature thermistor in
remote controller
3 Display time to clean air filter
calculation (Set when filter sign is not
to be displayed.)
5 Information to intelligent Manager,
intelligent Touch Controller
6 Thermostat sensor in group control
11(21) 7 Airflow adjustment
12(22) 0 Optional accessories output selection
(field selection of output for adaptor for
wiring)
1 ON/OFF input from outside (Set when
ON/OFF is to be controlled from
outside.)
2 Thermostat differential changeover
(Set when remote sensor is to be used.)
3 Airflow setting when heating
thermostat is OFF
4 Automatic mode differential
5 Power failure automatic reset
6 Airflow setting when Cooling thermostat is OFF
13(23) 0 Setting of normal airflow
1 Selection of airflow direction
(Set when a blocking pad kit has been installed.)
3 Operation of downward flow flap: Yes/No
4 Field set airflow position setting
5 Setting of static pressure selection
6 External Static Pressure Settings
15(25) 1 Thermostat OFF excess humidity
2 Direct duct connection
(when the indoor unit and heat reclaim
ventilation unit are connected by duct
directly.) ∗Note 6
3 Drain pump humidifier interlock selection
5 Field set selection for individual
ventilation setting by remote controller
Test Operation
Setting Contents
Ultra
long life
filter
Long life
filter
Standard
filter
controller + Body
Second Code No.(Note 3)
01 02
Light Approx. Heavy Approx.
10,000 5,000
hrs.
Approx. Approx.
2,500 1,250
hrs.
Approx. Approx.
200 hrs. 100 hrs.
Long life filter Ultra long life filter
Remote Only body
thermostat
thermostat
Display No display
Only unit sensor Sensor value as
value (or remote set by 10-2-X or
sensor if 10-6-X.
installed).
Use unit sensor Use both unit
only (or remote sensor (or
sensor if remote sensor if
installed). installed) AND
remote sensor.
Completion of
OFF airflow
adjustment
Indoor unit —
turned ON by
thermostat
Forced OFF ON/OFF control
1°C 0.5°C
LL Set fan speed
01:0 02:1 03:2
Not equipped Equipped
LL Set fan speed
N H
F (4 directions) T (3 directions)
Equipped Not equipped
Draft prevention Standard
Standard High static
pressure
01:30 02:50 03:60 04:70
09:120 10:130 11:140 12:150 13:160 14:180 15:200
Not equipped Equipped
Not equipped Equipped
Not equipped Equipped
Not equipped Equipped
03 04
— —
hrs.
hrs.
— —
Only remote —
controller
thermostat
— —
— —
— —
Start of
airflow —
adjustment
Operation Malfunction
output output
External —
protection
device input
— —
— —
04:3 05:4 06:5 07:6
— —
— —
S —
W (2 —
directions)
— —
Ceiling —
Soiling
prevention
— —
05:80 06:90 07:100 08:110
— —
— —
— —
— —
Field Setting
Details
No
(1)
(2)
(3)
(4)
—
—
(5)
(6)
(7)
(8)
(9)
08:7 (10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
—
(19)
(20)
(21)
(22)
152