Module Accessories - Siemens S7-300 Installation Manual

,QVWDOODWLRQ
$FFHVVRULHV LQFOXGHG
Installation accessories are included with the module package. The appendix
contains a list of accessories and spare parts together with the corresponding
order numbers.
Table 6-1
CPU
Signal module (SM)
Function Module (FM)
Communication module (CP)
Interface module (IM)
6-2

Module accessories

0RGXOH $FFHVVRULHV LQFOXGHG
1 x Slot number label
2 keys
(only for CPUs with a key
switch, such as the CPU
318-2 DP)
Inscription labels
1 bus connector
1 labeling strip
1 bus connector
1 inscription label
(only CP 342-2)
1 x Slot number label (only
IM 361 and IM 365)
S7-300 Automation System, Hardware and Installation: CPU 312IFM - 318-2 DP
'HVFULSWLRQ
For assigning slot numbers
The key is used for
operating the CPU's mode
selector switch
For labeling the integrated
inputs and outputs (CPU
312 IFM, 314 IFM) with the
MPI address and firmware
version
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID
11978022.
For electrical interconnection
of modules
for labeling module I/Os
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
For electrical interconnection
of modules
for labeling the connection to
the PLC interface
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
For assigning slot numbers
on racks 1 to 3
A5E00203919-01