Previous view
8
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
■
D Using the "Your Call Sign"
The "Your Call Sign" memory stores the programmed
"UR" (destination) call sign.
When you select an individual station call sign for the
"TO" (Destination) setting using "Your Call Sign," a gate-
way call can be made.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you can
make a call.
Hold down
for 1 second.
q
• The DR mode is selected.
Push D-pad(
) to select "TO," and then push D-
w
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad(
) to select "Your Call Sign," and then
e
push D-pad(Ent).
Push D-pad(
) to select the destination, and then
r
push D-pad(Ent).
• Example: "TOM"
• "TOM" is displayed on "TO."
NOTE: If the repeater, set to "FROM" (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
After selecting a destination, you can select other
station preset in your transceiver by rotating [DIAL].
Means this station
is programmed as
the 33th of the 33
stations on your
memory.
8-11
Example: Select "TOM" from the "Your Call Sign."
Completed
The call sign of
the selected sta-
tion is displayed.