Icom ID-51A Advanced Instructions page 293

Previous view
16
MENU SCREEN
DV Set items (Continued)
■
RX Record (RPT)
DV Set > RX Record (RPT) (RX Record (RPT))
The transceiver can record the data of up to 50 individual calls.
When the received signal includes a status message ("UR?" or "RPT?") that
is sent back from the access repeater, you can record up to 50 messages or
only the latest one, in the Received Call Record.
• ALL : Records up to 50 calls.
• Latest Only : Records only the latest call.
BK
DV Set > BK (BK)
The BK (Break-in) function allows you to break into a conversation, where
the two other stations are communicating with call sign squelch enabled.
• OFF : Turns the function OFF.
• ON : Turns the function ON.
"BK" appears on the display.
NOTE: The BK function is automatically turned OFF when transceiver is
turned OFF.
EMR
DV Set > EMR (EMR)
The EMR communication mode can be used in the digital mode. In the EMR
mode, no call sign setting is necessary.
When an EMR mode signal is received, the audio (voice) will be heard at
the specified level even if the volume setting level is set to minimum level, or
digital call sign/digital code squelch is in use.
• OFF : Turns the function OFF.
• ON : Turns the function ON.
"EMR " appears on the display.
NOTE: The EMR function is automatically turned OFF when transceiver is
turned OFF.
EMR AF Level
DV Set > EMR AF Level (EMR AF Level)
Set the audio output level to between 0 and 39 for when an EMR communi-
cation mode signal is received.
When an EMR signal is received, the audio will be heard at the set level, or
the [VOL] control level, whichever is higher.
To disable the setting, set it to "0."
NOTE: After an EMR signal disappears, the audio level will remain at the
EMR level. In this case, rotate [VOL] to adjust the audio level.
16-58
(Default: ALL)
(Default: OFF)
(Default: OFF)
(Default: 19)