D Clearing The Skip Setting - Icom ID-51A Advanced Instructions

Previous view
13
SCAN OPERATION
Setting and clearing the skip frequencies (Continued)
■

D Clearing the skip setting

Push [M/CALL] one or more times to select the
q
Memory mode.
Rotate [DIAL] to select the memory channel you
w
want to clear as the skip channel.
Push [QUICK] .
e
Push D-pad( ) to select "SKIP," and then push
r 
D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "OFF."
t 
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory scans.
Push D-pad(Ent) to save the selection.
y
• The skip setting is canceled.
Information
✓
The skip setting is also cancelled when the memory chan-
nel set as skip channel is deleted.
See page 12-13 for details.
[DIAL]
13-8
Push [M/CALL] ,
then rotate [DIAL] to
select the memory
channel to clear its skip
setting.
Push [QUICK] .
The channel that
is programmed as
a skip frequency.
Push D-pad() to
select, then push
D-pad(Ent).
"PSKIP" disappears.