From" (Access Repeater) Setting - Icom ID-51A Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>
■ "FROM" (Access repeater) setting
Your access repeater must be set to "FROM" when you
transmit a call in the DR mode.
You have four ways to set the access repeater.
Click the title shown below to jump to the specified
page.
• When you know your access repeater
From the repeater list (p. 8-3)
Select the repeater preloaded in your transceiver's
repeater list.*
• When you don't know which repeater you can access.
Search for a repeater using the DR mode scan (p. 8-4)
Searches for DV signals from a repeater or a simplex
frequency.
Search for the nearest repeater (p. 8-5)
The transceiver searches the nearest repeater by us-
ing your own and the repeater's position.
• When the "FROM" data is stored in the TX History.
Setting from the TX History (p. 8-7)
When you transmit a call in the DR mode, "FROM"
(the access repeater) data is stored in the TX History.
You can select the access repeater from the record.
"Hirano" repeater
is set in "FROM."
Blinks
While DR mode scanning
8-2