D Setting The Volume For Dualwatch - Icom ID-51A Advanced Instructions

Previous view
5
BASIC OPERATION
Dualwatch operation (Continued)
■

D Setting the volume for Dualwatch

The volume setting for Dualwatch can be set for both
bands simultaneously or for each band separately, in
the MENU screen.
Push [MENU] to enter the Menu screen.
q
Push D-pad( ) to select the root item (Sounds), and
w
then push D-pad(Ent) to go to the next level.
D-pad
(Ent)
(�)
( MENU > Sounds > Volume Select)
Refer to the menu sequence shown directly above
e
and push D-pad() to select, and then push D-
pad(Ent) to enter, one or more times until the last
screen is displayed.
Push D-pad( ) to select the desired option.
r
• All : The audio output level for the BC
Radio, A band and B band are ad-
justed at the same time.
• BC Radio Separate : The audio output level for the BC
Radio is independently adjusted.
The audio output level for A band
and B band are adjusted at the
same time.
• Separate : The audio output level for the BC
Radio, A band and B band are in-
dependently adjusted.
Push [MENU] to exit the Menu screen.
t
When "All" or "BC Radio Separate" is selected:
Rotate [VOL] to adjust the audio level.
➥
• The audio output levels for A band and B band are ad-
justed at the same time:
When "Separate" is selected:
Push [MAIN] for 1 second to select A band or B
q
band for the MAIN band.
Rotate [VOL] to adjust the audio level.
w
• When the audio output level for A band and B band are
independently adjusted.
For example, even if the audio output level for A band is
adjusted, B band's audio level stays at the original level.
[VOL]
5-14