Removing The Microsd Card - Icom ID-51A Advanced Instructions

Previous view
2
USING A microSD CARD

■ Removing the microSD card

Turn OFF the power.
q
Lift OFF the [micro SD] slot cover on the side panel.
w
Push in the microSD card until a click sounds, and
e
then carefully pull it out.
• DO NOT touch the terminals.
Firmly close the [micro SD] slot cover.
r
CAUTION:
After a microSD card is
inserted, firmly close the
[micro SD] slot cover as
shown to the right.
If removing the microSD card while the transceiver's
power is ON, by doing the following steps.
Push [MENU] .
q
Push D-pad( ) to select the root item ("SD Card"),
w

and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Unmount," and then push
e 
D-pad(Ent).
• The confirmation screen "Unmount OK?" appears.
Push D-pad( ) to select "YES," then push D-pad(Ent)
r
to unmount.
When the unmounting is completed, "Unmount is
t
completed." is displayed, then the screen automati-
cally returns to the SD CARD menu.
Push [MENU] to exit the MENU screen.
y
Lift OFF the [micro SD] slot cover on the side panel.
u
Push in the microSD card until a click sounds, and
i
then carefully pull it out.
• DO NOT touch the terminals.
Firmly close the [micro SD] slot cover.
o
Close the cover,
leaving no gap.
Wrong
Correct
2-4
Slot cover
Push the microSD
card until a click
sounds.
Slot cover
Pull the microSD
card out.