Icom ID-51A Advanced Instructions page 250

Previous view
16
MENU SCREEN
Menu items and Default settings (Continued)
■
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set the
Others
Information
Clone
Reset
Voltage
Version
Clone Mode
Clone Master Mode
Partial Reset
All Reset
Shows the battery voltage.
Shows the transceiver's firmware version
number.
Reads or writes the CS-51 data from or
to the PC, and/or to receive data from a
Master transceiver.
Writes your ID-51A/E (Master) data to an-
other ID-51A/E (Sub).
Returns all settings to their defaults, with-
out clearing the memory contents, call
sign memories or repeater lists.
Clears all programming and memories,
and return all settings to their defaults.
16-15
DESCRIPTIONS