Control Panel Display For Sub-Class -10/01 - Pfaff 3119 Instruction Manual

Sewing
10

Control panel display for sub-class -10/01

.02
Displays on the screen:
3800:
+
-
P1:
+
-
1500:
10 - 3
4200 P1 1500
+ +
- -
Maximum speed
The value can be changed directly with the corresponding plus/minus key.
Program number
The stored variable and special programs can be selected directly with the
corresponding plus/minus key. Only reserved program numbers are displayed,
variable programs from 1 to 39, special programs from 40 to 49.
When selecting these programs, the program keys are used as call-up keys. The
current program number selected is stored on the corresponding program key, if
the program keys are pressed for longer than 2 seconds.
In addition with the selected program key, the corresponding allocated stop
position is selected, see Chapter 13.48 Basic position of the stop.
Piece counter / reverse counter
Depending which function is activated (piece counter or reverse counter), the
number of buttonholes already sewn, or the number of buttonholes still to be
sewn is displayed.
Made in Germany
+
-