Retainer Position (Only For 3119-2/62 And -2/63) - Pfaff 3119 Instruction Manual

Adjustment
13 Retainer position
.46
13 - 47
(only for 3119-2/62 and -2/63)
Requirement
Retainer 1 should
1. be positioned parallel to the cutting slot with its front edge flush with the needle hole and
2. as near as possible over the workpiece without restricting it.
65-002
Fig. 13 - 43
Adjust retainer 1 (screw 2) according to the requirements.
1
2
1