13
Bobbin winder
.45
Requirement
1. When the bobbin winder is activated, the friction wheel 5 should be driven reliably.
2. When the bobbin winder is deactivated, the drive wheel 1 should not touch friction
wheel 5.
3. When the bobbin is filled up to 1 mm from the edge, the bobbin winder should switch
off automatically.
4
Fig. 13 - 42
Adjust drive wheel 1 ( screws 2 ) according to requirements 1 and 2.
Adjust stud 3 ( screw 4 ) according to requirement 3.
5
3
Adjustment
2
1
2
13 - 46