Operating Controls
7
Control panel
.04
The control panel is used to display and access machine functions for set-up
and sewing, to enter parameter values and to read error messages and service settings.
The control panel has the following operating and display controls:
The display 1 comprises a two-line alphanumerical LCD display with 16 characters per
The plus/minus keys 2 are used for selecting or altering the functions and parameters
The function keys 3 are used for turning the corresponding function on and off.
16
1
3500
2
Fig. 7 - 04
line and is used to display corresponding information and selection parameters.
shown on the display.
Switched-on functions are each indicated by the lit LED.
1
3,5
2000
3
0
00