Cam Guide Unit - Pfaff 3119 Instruction Manual

13

Cam guide unit

.30
Requirement
The starting thread should be sewn over with no problem.
Fig. 13 - 26
Bring the machine into its basic position and retract the cutter cylinder completely.
Adjust the cam guide unit 1 ( screws 2 and 3 ) according to the requirement.
Adjust drive plate 4 ( screw 5 ) according to the requirement.
The opening and swinging out of the needle thread cutter must be corrected
during sewing, if necessary.
4
3
1 5
Adjustment
2
13 - 30