Adjustment
13 - 55
44 mm
83-40
Fig. 13 - 50
Press program key "3" and turn nut 5 (nut 6) in accordance with requirement 3.
Switch off the machine.
Adjust stop 7 (screws 8) in accordance with requirement 4.
The above allocation of parameters "212", "213" and "214" to program keys "1",
"2" and "3" can be altered as desired.
The stop settings are dependent on tape width and seam length.
The value named in requirement 1 is a basic value, on which the following
settings are based. If the basic value named in requirement 1 is altered, the
values named in requirement 2 and 3 must be adapted.
6
5
7
54 mm
2
83-041
4
1
3