Control Panel - Pfaff 1571 Instruction Manual

7

Control panel

.11
1
Fig. 7 - 11
The current operating status are indicated on the control panel 1. The machine is operated
with constant dialogue between the control and the operator; different pictograms and / or
texts are displayed for this purpose according to the operating status of the machine. Picto-
grams or texts with a border represent functions that can be called up by pressing on the re-
spective point on the monitor. Pressing the respective function causes its immediate actu-
ation or activation/deactivation or another menu will appear, e.g. for entering a value. Acti-
vated functions are indicated by pictograms shown inversely. Apart from the bobbin change
function, the pictograms and texts without border are only for display purposes and can-
not be called up by pressing them. The SD card 2 in the control panel can be used to import
seam programs.
Presentation of functions
Normal pictogram
Inverse pictogram
Example:
= Function deactivated (inactive)
= Function activated (active)
Operating Controls
2
23