Status Display Of Temperature Control; Regulator For Drive Roller Start Delay - Pfaff 8304-040 Instruction Manual

7

Status display of temperature control

.05
Fig. 7 - 05
7

Regulator for drive roller start delay

.06
Fig. 7 - 06
1
2
3
4
5
6
1
● Depending on the status of the
temperature control, diodes 1 - 6 light up.
Diode 1 lights up when the actual
temperature deviates from the
required temperature by +/-50°C.
Diode 2 lights up, if the temperature
exceeds 650°C, or if the sensor
breaks.
Diode 3 - no function
Diode 4 - no function
Diode 5 lights up as soon as the heating is
switched on.
Diode 6 lights up when the machine is
heated.
● On regulator 1 the time can be set, when
the drive roller is activated after the hot-
air nozzle has been swung into position.
Controls
7 - 3