Control Panel - Pfaff 3586-25 Series Instruction Manual

Operating Controls
7

Control panel

.03
The current operating statuses are indicated on the control panel 1. The machine is operated
with constant dialogue between the control unit and the operator; different pictograms and
/ or texts are displayed for this purpose according to the operating status of the machine.
Pictograms or texts with a border represent functions that can be called up by pressing on
the respective point on the monitor. Pressing the respective function causes its immediate
actuation or activation/deactivation or another menu will appear, e.g. for inputting a value.
Activated functions are indicated by pictograms shown inversely. Pictograms or texts
without a border are only used for display purposes and cannot be called up by pressing
them.
The SD card 2 in the control panel can be used to import seam programs and operating
software.
Presentation of functions
18
Fig. 7 - 03
Normal pictogram
Inverse pictogram
1
= Function deactivated (inactive)
= Function activated (active)
2 GB
max.
2