Paper Settings; Specifying A Paper Size - Ricoh SP 5310DN User Manual

Hide thumbs Also See for SP 5310DN:
Table of Contents

Advertisement

Paper Settings

This section explains how to specify paper size and type using the control panel.
• When [Tray Setting Priority] is set to [Machine Setting(s)], the paper settings configured using the
printer's control panel have priority over the settings specified in the printer driver or commands.
For details, see "Machine Modes", Operating Instructions.

Specifying a Paper Size

• To use the paper size and feed direction other than those indicated on the paper size dial, set the
dial to " ", and set the paper size using the control panel.
• To use custom size paper, be sure to specify the paper size using the control panel and the printer
driver.
• The printer cannot print on custom size paper if the application does not support custom size paper.
Specifying standard size paper
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1.
Select [Paper Input]
2.
Select [Paper Size: (tray name)]
3.
Select the size of the paper set in the specified tray
• For details about the available paper size, see page 48 "Paper Size Specifications".
Specifying custom size paper
Press the [Menu] key, and then select the setting items using the [ ] or [ ] key.
1.
Select [Paper Input]
2.
Select [Paper Size: (tray name)]
3.
Select [Custom Size]
4.
Enter the horizontal value
5.
Enter the vertical value
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Press [OK]
Paper Settings
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp 5300dn

Table of Contents