Ricoh SP 5310DN User Manual page 103

Problem
Edges of sheets are creased.
Edges of sheets are creased.
Duplex printing is
malfunctioning.
The image on the back side of
duplex printing has mottled
blank patches or is smudged.
White stripes appear on the
OHP.
Cause
The paper is damp.
You are using non-
recommended paper.
You have selected a paper tray
that is not set for duplex print.
Missing patches and smudges
are caused by moisture leaking
from the paper.
Fragments of paper are stuck to
the OHP.
Other Printing Problems
Solution
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 53 "Paper Precautions".
Use recommended paper. For
details about recommended
paper, see page 48 "Paper
Size Specifications" and
page 51 "Paper Type
Specifications".
Change the setting to enable
duplex printing for the paper
tray.
• Do not install the printer in
areas that are susceptible
to low temperature.
• Use paper that has been
stored in the recommended
temperature and humidity
conditions. For details
about the proper way to
store paper, see page 53
"Paper Precautions".
Use a dry cloth to wipe any
paper fragments off the back of
the OHP.
101