The Printed Image Is Different From The Image On The Computer - Ricoh SP 5310DN User Manual

3. Troubleshooting
Problem
Printing via wireless LAN is
slow.

The Printed Image is Different from the Image on the Computer

Problem
The printed image is different
from the image on the
computer's display.
Images are cut off, or excess
pages are printed.
As a result of printing using PDF
Direct Printing, characters are
missing or misshapen.
106
Causes
• A communication error
might have occurred.
• Interference from other
wireless LAN devices can
reduce the communication
speed
• If the printer is using a
wireless LAN, radio waves
may be interfering with the
wireless communication.
This may occur if there is a
microwave oven, cordless
telephone, industrial
printer, scientific
instrument, or medical
instrument using the same
frequency range near the
device.
When you use some functions, such as enlargement or reduction,
the layout of the image might be different from that displayed on
the computer display.
If you are using paper smaller than the paper size selected in the
application, use the same size paper with that selected in the
application. If you cannot load paper of the correct size, use the
reduction function to reduce the image, and then print.
For details, see the printer driver's Help.
Before printing, embed the font in the PDF file to be printed.
Solutions
• Move the printer farther
away from the wireless
LAN device.
• If there are active wireless
LAN devices nearby, move
the printer or disable those
devices.
• Turn off other printers or
instruments that use the
same frequency range,
and then try printing again.
If printing is successful,
move the devices to a
location where they do not
interfere with the printer.
Solutions