Webui - AT&T SB67030 User Manual

WebUI

Symptom
Unable to access the WebUI
Log-in page from my
computer.
Changes made to System
Configuration from the
WebUI are not saved.
Troubleshooting
Synapse SB67030 and Accessories User's Guide
Probable Cause
The computer is not
connected to the same
subnet (network) as the
Deskset, and the subnets are
not set up to communicate.
must be pressed on
each screen to confirm the
changes.
Corrective Action
Verify the IP address. You must correctly enter the IP

address of your Deskset into your Internet browser's
address bar. At the Deskset, press MENU –> 4 to see the
IP address displayed in the third line of the information.
Ensure that there is an Ethernet cable attached to

Network port on the Deskset and to the LAN. If a PC at
the same workstation is sharing the LAN connection,
attach an Ethernet cable to your computer's Ethernet port
and to the PC port on the back of the Deskset.
Confirm that your computer and your Deskset are on the

same subnet so that they can talk to each other. Check
that the first three sections of each IP address are the
same. If they are not, they may not be connected to the
same subnet. Contact the installer; the subnets may not
be set up to communicate.
Press on each screen to confirm the changes.

263
WebUI