[Handset] Using The Cordless Handset Speakerphone - AT&T SB67030 User Manual

[Handset] Using the Cordless Handset Speakerphone

When the speakerphone is active, the SPEAKER hard key is lit. In Idle or Dial mode, this hard key behaves like PHONE, except
that audio is from the speakerphone.
To use the speakerphone:

12:30p Feb 23
Graham Bell
1-9-232-555-0176
00:56 ON A CALL
XFER CONF
Figure 20. Speakerphone
Overview
Synapse SB67030 and Accessories User's Guide
To initiate a call, press SPEAKER. The key becomes lit, you hear a dial tone, and the

screen shown in Figure 20 displays. You can dial.
To end a call, press OFF. Pressing SPEAKER does not hang up calls. The key backlight

goes out and the Idle screen shown in
During an active call, pressing SPEAKER switches audio between the Handset and the

speakerphone.
Figure 19 on page 37
42
displays.