Accessing The Web User Interface (Webui) - AT&T SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Accessing the Web User Interface (WebUI)

To access the WebUI:
1. Ensure that your computer is connected to the same network as the Synapse system.
Your computer may already be connected to the network through the PC port on the
back of a Deskset.
2. On the Deskset, press MENU then 4 to display Deskset Information.
3. On the Deskset Information screen, find the IP Address.
4. On your computer, open an Internet browser.
5. Type the Deskset IP address in the browser address bar, and press ENTER on your
computer keyboard.
6. A Login page appears.
7. Under Login Name, log on as a user by typing your extension number.
8. Enter your password if you have created one (see
Password" on page
9. Click
You can create or change your user password once you have logged on.

The Basic Settings page shown in

Web Interface
100). Otherwise, leave the password blank.
.
Changing a setting does not instantly apply the new value. Clicking
saves and applies all changes on that page.
108
Back to Contents
"Setting and Changing Your
Figure 39 on page 109 appears.