Using Do Not Disturb (Dnd) - AT&T SB67030 User Manual

Using Do Not Disturb (DND)

Do Not Disturb silences incoming ringing and paging. Incoming calls can still be answered as long as the Call Appearance LED is
flashing.
To enable or disable Do Not Disturb:

12:30PM Thu Feb 25 2010
EXT 249
John Smith
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press SELECT.
DND DND DND CallFw d Page
Figure 96. Idle
DND Settings
DND - Do Not Disturb
When DND is on, all incoming calls w ill
be sent to your Call Fw d-No Answ er
destination.
Confirm
Figure 97. DND Confirmation
Deskset Settings
Synapse SB67030 and Accessories User's Guide
1. From the Idle screen shown in Figure 96,
press
to display and press
Settings screen shown in Figure 97 displays.
2. Press
appears in the top right of the display, as
shown in Figure 98.
Quick
OR
Dial
More 1/2
Press
time.
3. Press
[ON]
The DND indicator only displays in the top right of the display when Call
Forward All is disabled. When Call Forward All is set, no calls ring regardless
of the DND setting, so the DND indicator does not appear.
Quick
Dial
Cancel
. (If necessary, press
.) The DND
to save changes.
to return to Idle mode at any
to turn DND off.
disappears from the top right of the display.
100
12:30PM Thu Feb 25 2010
EXT 249
John Smith
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press SELECT.
DND DND DND CallFw d Page
Figure 98. DND Set
DND ON
Quick
Dial
More 1/2