Ring Group; Do Not Disturb (Dnd) - AT&T SynJ SB67158 User Manual

Getting started
Telephone base setup

Ring group

Use this feature to specify which extensions receive incoming calls. By
default, all extensions and the telephone base receive incoming calls. You
can block some extensions from receiving calls, however, they can still be
used to make outgoing calls.
When the telephone is idle, press MENU
1.
2. Press or
ENTER.
MENU/
3. Press or
ENTER.
MENU/
4. Press REP or SKIP to select a desired line (L1, L2, L3
or L4) while Ring group flashes.
5. Press or
use the dial pad to press the number of the extension
( * ,1,2,3,4,5,6,7,8,9,0) that you want to delete, or press
the number again to add it back to the ring group.
6. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
NOTE: The symbol

Do not disturb (DND)

Use this feature to silence your telephone base. When you activate the do
not disturb function, the
you will not hear paging tones or incoming call rings.
Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming call. If you
receive an intercom call, the extension number of that intercom call appears
on the screen display.
Press DND twice to prevent interruptions. The DND
1.
indicator turns on.
2. Press DND again to resume normal call alerts. The DND
indicator turns off.
to scroll to Ringer setting. Press
to scroll to Ring group. Press
to scroll to Extension number:, then
*
represents the telephone base; 0 represents extension 10.
icon appears on the telephone base screen and
.
/ENTER
17
Directory
Call log
Ringer setting
>
Mailbox setup
Ringer volume
Ringer tone
Ring group
>
Ring group: L3
Extension number:
*1234567890
<>
Ring group: L3
Extension number:
*1-3-56-8-0
ENTER =Save
*: Base
0 missed calls
5:12PM 4/27