Specifying Center Binding - Konica Minolta bizhub C352 User Manual

Basic copy operations
3.13

Specifying center binding

The paper that is fed out can be folded in half and stapled at two places
along the vertical center.
Note
The Fold & Staple settings are available only if the optional finisher and
saddle stitcher are installed.
!
Detail
In order for copies to be bound at the center or folded in half, all of the
following conditions must be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 257 mm and 431.8 mm.
C352
"Center Staple" + "Fold" settings
(folded in half and stapled at the
center in two places)
Original
(The "Booklet" function
is automatically set.)
"Fold" setting
(folded in half)
"Center Staple" setting
(stapled at the center in
two places)
3
3-81