Utility
7
Touch [+] or [–] to adjust the setting between –5 and +5. An adjustment
is possible if the size of the white areas in missing print or the white
spots is 0.5 mm or less.
–
For missing print or
white spots in the
print image, touch [–]
to reduce the adjust-
ment.
–
For uneven printing
of the print image,
touch [+] to increase
the adjustment.
–
Each time [+] or [–] is
touched, the value is
increased or de-
creased by one in-
crement.
–
To cancel the adjust-
ment, touch [Cancel].
8
Touch [OK].
9
Touch [Exit].
Try performing the copy cycle again.
10
Check the printed image, and finish the adjustment if there are no
flaws.
–
If more adjustment is necessary, repeat steps 1 through 9.
–
If the print image flaws are worse, adjust the setting in step 7 in the
opposite direction.
C352
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
12
12-57