3
Removing specks from the left partition glass (Despeckle)
If the "Despeckle" setting is selected, specks from the left partition glass are
removed when scanning of an original loaded into the ADF begins.
1
Load the original into the ADF.
–
For details on positioning the original, refer to "To load the original
into the ADF" on page 3-7.
2
In the Basic screen, touch [Combine Originals].
3
Touch [Despeckle].
–
To cancel the "Despeckle" setting, touch [Despeckle] again to
deselect it.
Note
The scanning speed will be reduced.
3-28
Basic copy operations
C352