Konica Minolta bizhub C352 User Manual page 351

7
4
Touch [Custom Size].
The Custom Size screen appears.
5
Type in the length (X) and width (Y) of the paper.
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 457.2 mm)
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (90.0 mm to 311.1 mm)
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
Can paper sizes be stored?
?
% Five non-standard paper sizes can be stored.
% To recall a stored paper size, touch the corresponding memory key.
% The names "memory1" through "memory5" can be changed. For
details on changing the names, refer to "To store a non-standard
paper size (Custom Size settings)" on page 7-15.
% For details on storing paper sizes, refer to "To store a non-standard
paper size (Custom Size settings)" on page 7-15.
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
7-14
Copy paper/originals
C352