To Place The Original On The Original Glass - Konica Minolta bizhub C352 User Manual

Basic copy operations

To place the original on the original glass

0 For details on the types of originals that can be placed on the original
glass, refer to "Originals" on page 7-25.
0 When placing the original on the original glass, be sure to lift open the
ADF or the original cover at least 20°.
If the original is placed on the original glass without the ADF or the original
cover being lifted at least 20°, the correct original size will not be detect-
ed.
0 Do not place objects weighing more than 2 kg on the original glass. In ad-
dition, do not press down extremely hard on a book spread placed on the
original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the orig-
inal cover, or ADF if it is installed. When an original is being scanned with
the original cover or ADF open, do not look directly at the light that may
shine through the original glass. Although the light that shines through the
original glass is bright, it is not a laser beam and, therefore, is not as dan-
gerous.
1
Lift open the original cover, or the ADF if it is installed.
2
Position the original face down onto the original glass.
– Load the original pages so that the top of the original is toward the
back or the left side of the machine.
When
loaded
in the v
orientation:
C352
When
loaded
in the w
orientation:
20°
3
20°
3-9