Transceivers And Connectors Supported By The Cisco Nexus 2232Tm Fex - Cisco Nexus 2000 Series Installation Manual

Cisco Nexus 2232TM FEX
Figure 2-20
1
1
2
For more information on this fan tray, see the fan tray specifications in
Specifications". For LED descriptions, see

Transceivers and Connectors Supported by the Cisco Nexus 2232TM FEX

The Cisco Nexus 2232TM FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to eight fabric uplink connections to the following Cisco Nexus 7000 Series
switch I/O modules:
•
•
•
•
You must use the same transceivers on both ends of the same uplink cable.
Cisco Nexus 2000 Series Hardware Installation Guide
2-20
Port-Side Intake Airflow Fan Tray for the Cisco Nexus 2232PP and 2232TM FEXs
2
3
Captive screws (2)
Handle used for removing and installing the module
F2 Series 48-port 10-Gigabit I/O module (N7K-F248XP-25)
M1 Series 32-port, 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
M1 Series 32-port, 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
M2 Series 24-port 10-Gigabit I/O module (N7K-M224XP-23L)
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
1
3
4
Appendix E, "LEDs".
Port-side intake airflow indicated by
a black stripe on the front.
Status LED
Appendix B, "Technical