Chassis; Supported Sfp+ Transceivers - Cisco Nexus 2000 Series Installation Manual

Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series or Cisco Nexus 6000 Series Switch
software ships with the Cisco Nexus 5000 Series switch software. The FEX downloads the software
image from the switch the same way that a module would download it from the supervisor in a modular

chassis.

This section includes the following topics:
•
•
•
•
•
Chassis
The Cisco Nexus 2224TP chassis has a height of 1.72 inches (4.37 cm), a width of 17.34 inches (44.04
cm), and a depth of 18.9 inches (48.1 cm). It weighs 18 pounds (8.0 kg). Its one-rack-unit (1 RU) form
factor takes up relatively little space, making it easy to incorporate into rack designs. The FEX is
mounted in a standard 19-inch (48.26-cm) rack. It has port side exhaust or port side intake airflow for
cooling. All switch ports are located at the rear of the unit in close proximity to server ports, and all
user-serviceable components are accessible from the fan side.
Figure 1-34
the location of components on the rear of the chassis. For information on what the chassis and component
LEDs indicate, see
Figure 1-34
1
2
Chassis, page 1-33
Ports, page 1-34
Power Supplies, page 1-34
Fan Tray, page 1-35
Supported SFP+ Transceivers, page 1-36
shows the location of the components on the fan side of the chassis, and
Table E-1 on page
Fan side of the Cisco Nexus 2224TP Chassis
1
2
Power supply
Fan tray (1)
E-2.
3
4
3 Power supply (blank power supply shown)
4
Status (top) and ID (bottom) LEDs
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2224TP
Figure 1-35 shows
1-33