Transceivers And Connectors Supported By The Cisco Nexus 2232Tm Fex - Cisco Nexus 2000 Series Installation Manual

Chapter 3 Using a Fabric Extender with a Cisco Nexus 9000 Series Switch
Figure 3-20
1
1
2
For more information on this fan tray, see the fan tray specifications in
Specifications". For LED descriptions, see
"Removing and Installing the Fan Tray" section on page

Transceivers and Connectors Supported by the Cisco Nexus 2232TM FEX

The Cisco Nexus 2232TM FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to eight fabric uplink connections to the Cisco Nexus 9396PX switch.
The Cisco Nexus 2232TM FEX also supports RJ-45 connectors for up to 32 downlink connections to
hosts.
connections.
Table 3-6 Supported Transceivers and Connector for the Cisco Nexus 2232TM FEX Interfaces
Transceiver or Connector
FET-10G
SFP-10G-LR
SFP-10G-SR
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
Back-to-Front Airflow Fan Tray for the Cisco Nexus 2232PP and 2232TM FEXs
2
3
Captive screws (2)
Handle used for removing and installing the module
Table 3-2 lists the transceivers and connectors supported by this FEX for its uplink and downlink
Fabric Host
Cable Interface Interface
Type (Uplink) (Downlink) Comments
Optical X –
Optical X –
Optical X –
Copper X –
Copper X –
Copper X –
1
3
4
Appendix E, "LEDs". To replace one of these fan trays, see
4-21.
10-Gbps FEX transceiver
10-Gbps long range transceiver (up to 6.2 miles [10 km])
10-Gbps Short range transceiver (up to 984 feet [300 m])
10-Gbps Twinax, passive transceiver (3.3 feet [1 meter])
10-Gbps Twinax, passive transceiver (9.8 feet [3 meters)
10-Gbps Twinax, passive transceiver (16.4 feet [5 meters])
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2232TM FEX
Back-to-front airflow indicated by a
black stripe on the front.
Status LED
Appendix B, "Technical
3-19