Cisco Nexus 2224TP
1
2
Figure 1-33
1
1
2
To replace a fan tray, see the
descriptions, see
Supported Transceivers and Cables
The Cisco Nexus 2232TM-10GE Series FEX supports SFP+ Ethernet transceivers. The enhanced
Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional device with a
transmitter and receiver. It has a 20-pin connector on the electrical interface and duplex LC connector
on the optical interface. Currently, the FEX supports the short-range SFP and long-range SFP
transceiver. Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver.
For an updated list of supported transceivers and optics, please see the
Extenders Release Notes.
Cisco Nexus 2224TP
The Cisco Nexus 2224TP is a stackable 1 RU FEX. This FEX is very similar to the Cisco Nexus 2248TP
except that it has 24 100/1000BASE-T downlink ports, 2 SFP+ uplink ports and you can order it with
port-side exhaust airflow or port-side intake airflow. You can use this FEX with the Cisco Nexus 5000
Series switch. The Cisco Nexus 2224TP is managed and configured by the upstream switch. The FEX
Cisco Nexus 2000 Series Hardware Installation Guide
1-32
Chapter 1
Using a Fabric Extender with a Cisco Nexus 5000 Series or Cisco Nexus 6000 Series Switch
Captive screws (2)
Handle
Port-Side Intake Airflow Fan Tray for the Cisco Nexus 2232TM-10GE FEX
2
3
Captive screws (2)
Black stripe indicates port-side intake airflow
"Removing and Installing the Fan Tray" section on page
Table E-1 on page
3
No black stripe indicates port-side exhaust
airflow
4
Status LED
1
3
Status LED
E-2.
4-21. For LED
Cisco Nexus 2000 Series Fabric