Airflow Optimization Accessories - Cisco Nexus 2000 Series Installation Manual

Appendix B Technical Specifications
Table B-6
Transceiver
SFP-H10GB-CU7M
SFP-H10GB-CU10M

Airflow Optimization Accessories

This section describes the airflow optimization accessories for the Cisco Nexus FEX.
For the details of the Cisco Nexus airflow extension sleeve and the Cisco Nexus airflow vent, see
Table
Table B-7
Accessories
PID
Name
Description
Dimensions
(height x width x
depth)
Weight
Cable Specifications for the 10-Gbps SFP+ Copper Transceivers
B-7.
Airflow Optimization Accessories
Airflow Extension Sleeve
NXA-AIRFLOW-SLV (2200 Series)
NXA-AIRFLOW-SLV-E (2300 Series)
Cisco Nexus Airflow Extension Sleeve
Optimizes airflow in port side exhaust
airflow deployments (port side exhaust)
for alignment of port in back of rack and
extension of power supply side of
chassis to port side exhaust of rack with
airflow sleeve
1.72" (1RU) x 17.3" x 8.5"(fully
retracted)* or 12.9"(fully extended)*
*Adjustable depth for the FEX, between
26 and 30 inches
5.7 lbs or 2.6 kg
Airflow Optimization Accessories
Cable Length
23.0 feet (7 meters)
32.8 feet (10 meters)
Airflow Vent
NXA-ACC-KIT-BAV
Cisco Nexus Airflow Vent
Optimizes airflow in port side intake top
of rack deployments (port side intake).
Airflow vent consists of metallic cover to
place on the upper exhaust of the FEX
port side and mounting rails with snap on
holes for airflow vent.
Vent cover is part of the mounting
hardware kit and its size is meaningless
to overall form factor of the chassis:
0.42" x 17.53" x 2.56"
0.42 lbs or 0.19 kg
Cisco Nexus 2000 Series Hardware Installation Guide
B-9