Sfp+ Copper Transceiver Specifications; Technical Specifications B - Cisco Nexus 2000 Series Installation Manual

Transceiver Specifications
SFP+ Optical Transceiver Specifications
This section provides the general and environmental specifications for the SFP+ transceivers used with
optical cables.
For the general specifications that apply to SFP+ transceivers, see
specifications, see
For information about Cisco 10GBASE SFP modules, refer to the
Table B-4 SFP+ Transceiver General Specifications
Transceiver Cable Type Connector Type
N2200 FET MMF
SFP-10G-SR MMF
SFP-10G-LR SMF
Table B-5
Parameter
Storage temperature
Case temperature
Relative humidity
Module supply voltage
1. Absolute maximum ratings are those values beyond which damage to
2. Functional performance is not intended, device reliability is not

SFP+ Copper Transceiver Specifications

This section provides the general and environmental specifications for the SFP+ transceivers used with
copper cables.
For the cable specifications that apply to SFP+ copper transceivers, see
Cisco Nexus 2000 Series Hardware Installation Guide
B-8
Table B-5.
Wavelength (nm)
Dual LC/PC 850
Dual LC/PC 850
Dual LC/PC 1310
Environmental and Power Specifications for the 10-Gbps SFP+ Optical Transceivers
1
Specification
–40 to 185°F (–40 to 85°C)
2
32 to 158°F (0 to 70°C)
5 to 95%
3.1 to 3.5 V
the device may occur if these limits are exceeded for other than a short
period of time.
implied, and damage to the device may occur over an extended period
of time between absolute maximum ratings and the recommended
operating conditions.
Appendix B
Table
Cisco Transceiver Modules
Core Size Modal Bandwidth
(microns) (MHz-km)
50 500
50 2000
62.5 160
62.5 200
50.0 400
50.0 500
50.0 2000
G.652 fiber —
Table
Technical Specifications
B-4. For the environmental
Datasheet.
Maximum Cable
Distance
82 feet (25 meters)
328 feet (100 meters)
85 feet (26 meters)
108 feet (33 meters)
216 feet (66 meters)
269 feet (82 meters)
984 feet (984 meters)
6.2 miles (10 km)
B-6.