Cisco Nexus 2224Tp Fex - Cisco Nexus 2000 Series Installation Manual

Cisco Nexus 2224TP FEX

The front of the Cisco Nexus 2224TP FEX chassis has one or two power supplies, a fan tray, and two
LEDs as shown in
redundancy, you must install a second power supply.
Make sure that all of the fan tray and power supply modules use the same airflow direction and have the
Caution
same color designation on the front. Otherwise, the switch can over heat and shut down,
Figure 3-24
1
1 Power supply
2 Fan tray
The rear of the Cisco Nexus 2224TP FEX has 24 100/1000BASE-T Ethernet downlink ports, two
10-Gigabit Ethernet uplink ports, an HDMI port, and LEDs, as shown in
Cisco Nexus 2000 Series Hardware Installation Guide
3-26
Chapter 3
Figure 3-24. This FEX model requires one power supply, but if you want power
Front View of the Cisco Nexus 2224TP Chassis
2
3
4
Using a Fabric Extender with a Cisco Nexus 9000 Series Switch
3 Power supply (blank shown)
4 Status (top) and ID (bottom) LEDs
Figure 3-25.