Cisco Nexus 2000 Series Installation Manual page 68

Cisco Nexus 2248TP-E FEX
Table 2-2 Supported Transceivers and Connector for the Cisco Nexus 2248TP-E FEX Uplink Interfaces
Transceiver or
Connector
SFP -H10GB-ACU7M
SFP -H10GB-ACU10M
RJ-45
Figure 2-10
Figure 2-10
5
1
2
3
Figure 2-11
connections.
Cisco Nexus 2000 Series Hardware Installation Guide
2-10
Fabric Host
Cable Interface Interface
Type (Uplink) (Downlink) Comments
Copper X –
Copper X –
Copper – X
shows the SFP+ optical transceiver used for uplink connections.
SFP+ Optical Transceivers and FETs
1 2
4
Receive optical bore
Transmit optical bore
Clasp shown in closed position
identifies the major features of the SFP+ copper transceiver and cable used for uplink
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
100/1000 Mbps Connector
3
4 Clasp shown in open position
5
Dust plug (use this to protect the bores from dust
contamination when the optical cables are removed)