Power Supplies For The Cisco Nexus 2224Tp Fex; Fan Tray For The Cisco Nexus 2224Tp Fex; Transceivers And Connectors Supported By The Cisco Nexus 2224Tp Fex - Cisco Nexus 2000 Series Installation Manual

Hide thumbs Also See for Nexus 2000 Series:
Table of Contents

Advertisement

Cisco Nexus 2224TP FEX
For information about the transceivers and connectors that you can use with these ports, see the
"Transceivers and Connectors Supported by the Cisco Nexus 2224TP FEX" section on page

Power Supplies for the Cisco Nexus 2224TP FEX

The Cisco Nexus 2200 Platform FEX chassis have two slots for front-end AC or DC power supplies that
have port-side-exhaust or port-side-intake airflow. These chassis are fully functional with one power
supply, but you can install a second power supply for power redundancy. You can install any of the
following power supplies in those two bays:
Make sure that all of the fan tray and power supply modules use the same airflow direction and have the
Caution
same color designation on the front. Otherwise, the switch can over heat and shut down,
For information on these power supplies, see the
section on page 3-13

Fan Tray for the Cisco Nexus 2224TP FEX

The Cisco Nexus 2224TP, 2248TP, and 2248TP-E FEXs use the same fan tray that you can order with
either port-side-exhaust airflow (N2K-C2248-FAN) or port-side-intake airflow (N2K-C2248-FAN-B).
For information on this fan tray, see the
page 3-13
descriptions, see
the Fan Tray" section on page

Transceivers and Connectors Supported by the Cisco Nexus 2224TP FEX

The Cisco Nexus 2224TP FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to two fabric uplink connections to Cisco Nexus 9396PX switches, and it
supports RJ-45 connectors for up to 24 downlink connections to hosts.
supported by this FEX for its uplink and downlink connections.
Table 3-10
Supported Transceivers and Connector for the Cisco Nexus 2224TP FEX Interfaces
Transceiver or Connector
FET-10G
SFP-10G-LR
SFP-10G-SR
Cisco Nexus 2000 Series Hardware Installation Guide
3-28
AC power supply with port-side-exhaust airflow (N2200-PAC-400W)
AC power supply with port-side-intake airflow (N2200-PAC-400W-B)
DC power supply with port-side-exhaust airflow (N2200-PDC-400W)
DC power supply with port-side-intake airflow (N2200-PDC-350W-B)
and the power supply specifications in the
and the fan tray specifications in
Appendix E,
Fabric
Host
Cable
Interface
Interface
Type
(Uplink)
(Downlink) Comments
Optical
X
Optical
X
Optical
X
Chapter 3
Using a Fabric Extender with a Cisco Nexus 9000 Series Switch
"Power Supplies for the Cisco Nexus 2248TP FEX"
"Fan Tray for the Cisco Nexus 2248TP FEX" section on
Appendix B, "Technical
"LEDs". To replace one of these fan trays, see
4-21.
10-Gbps FEX transceiver
10-Gbps long range transceiver (up to 6.2 miles [10 km])
10-Gbps Short range transceiver (up to 984 feet [300 m])
Appendix B, "Technical
Specifications".
Specifications". For LED
"Removing and Installing
Table 3-2
lists the transceivers
3-28.

Advertisement

Table of Contents
loading

Table of Contents