Figure - Cisco Nexus 2000 Series Installation Manual

Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
AC power supply with port-side intake airflow (N2200-PAC-400W-B)
•
DC power supply with port-side exhaust airflow (N2200-PDC-400W)
•
DC power supply with port-side intake airflow (N2200-PDC-350W-B)
•
Caution Make sure that all of the fan tray and power supply modules use the same airflow direction and have the
same color designation on the front. Otherwise, the switch can over heat and shut down,

Figure 2-4

black stripe on the front).
airflow.
power supply).
slot if the chassis has only one power supply.
Figure 2-4
1 Handle
2 FAIL (top) and OK (bottom) LEDs
3 Ejector latch
shows the exterior components on an AC power supply with port-side exhaust airflow (no
Figure 2-5
Figure 2-6 shows the black stripe used to indicate port-side intake airflow (in this case on an AC
Figure 2-7 shows the blank filler panel that you should install in an open power supply
AC Power Supply with Port-Side Exhaust Airflow for the Cisco Nexus 2200 Platform
1
2
3 5
4
shows the components on a DC power supply with port-side exhaust
4 No black stripe (port-side exhaust airflow)
5 AC power receptacle
Cisco Nexus 2000 Series Hardware Installation Guide
Cisco Nexus 2248TP-E FEX
2-5