Error Codes - Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual

Error Codes

The following error codes are displayed in the display window if an error occurs in the camera:
Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 160) for countermeasures.
Code No.
E-11 Video initialization error
E-27 Recording control error
E-30 P2 card removal error
E-34 LCD microcontroller error
E-38 P2 streaming microcontroller error
E-39 Abnormal initialization of the AVC-Intra codec
E-3F Microprocessor error in the camera control circuit
E-40 Image sequence error (in case of 24P, 30P and 25P), GENLOCK error
E-63 Something is wrong with the system control microprocessor.
E-6F Reference signal error.
00:00:00:11 Recording error on a P2 card
Card Warning Code
Code No. Description
The directory structure on the P2 card is not
E-70 supported. ([DIR NG CARD (Slot No.)] is
indicated on the viewfinder.)
The maximum number of overwrites on the P2
card has been exceeded. ([RUN DOWN
E-71
CARD (Slot No.)] is indicated on the
viewfinder.)
Description
Recording
Operation continues. However, back up data
on the P2 card as soon as possible, and
format the card before using it again.
Operation continues. However, recording or
playback may not operate correctly. It is
recommended that you replace the P2 card
with another one.
Type of warnings
1. System Errors
1. System Errors
2. Card removal error
1. System Errors
1. System Errors
1. System Errors
1. System Errors
5. Image Sequence Error (24P, 30P, 25P)
1. System Errors
1. System Errors
6. Recording Error/10. P2 Card Error
Indication in display
A warning code blinks once
every 2 seconds on the time
code display section of the
display window.
Maintenance and Inspections: Warning System
window
163