How to Use Scene File Data
It is possible to write the settings data into the scene file area
of the internal memory of the unit, or to read data written in
this area. 16 types of scene files are available. This data
allows you to quickly reproduce an optimum setup state.
To use the scene file data, go to the <SCENE> screen from
the FILE page.
To write settings data for scene files
1
Navigate the menu to the SCENE screen.
2
Turn the jog dial button to move the arrow (cursor) to the
SCENE SEL option.
3
Press the jog dial button to blink scene file numbers.
Then, turn the dial button to select a desired scene file
number (1 to 16).
4
Press the jog dial button to accept the scene file.
5
Turn the jog dial button to return the arrow (cursor) to
the option WRITE.
6
Press the jog dial button to display the following
message:
7
Turn the jog dial button to move the arrow (cursor) to
YES. Then, press the dial button.
This writes the setting data into the scene file area of the
unit internal memory.
8
To exit the menu, press the MENU button.
Adjustments and Settings for Recording: Handling data
97