Option Mode - Panasonic P2HD VariCam AJ-HPX3700G Operating Instructions Manual

Items/ Adjustable
Data Saved Range
USR SW F.RATE (1080-59.94i, When the FRATE function has been
1080-23.98PsF,
assigned to a user button, the starting
1080-24PsF)
frame rate under VFR operation is set.
1FRAME
When the mode has been changed
:
using other settings and the frame rate
24FRAME
value set here exceeds the maximum
:
30FRAME
frame rate allowed by the set mode, the
(1080-50i)
maximum frame rate is changed to the
1FRAME
maximum frame rate of the set mode.
:
25FRAME
S C U F R
SCAN REVERSE ON This setting is for correcting an image
OFF
which has been inverted by a film-use
lens or anamorphic lens attached to the
unit.
S C U F R
PC MODE SEL USB HOST This is for setting the operations mode of
USB DEV.
this unit when PC MODE is set to "ON"
and an external device is connected to
the USB connector.
USB HOST:
USB DEV.:
Note
When the PC MODE menu option is set
to "ON", no change can be made to this
option.
– – – F –
Used to enable or disable the mode that
PC MODE ON
OFF
allows the unit to be connected to a PC
or an external hard disk drive via
USB 2.0.
ON:
OFF:
Note
Once the power is turned off, the option
is always set to "OFF" when the power is
turned on next time.
– – – F –
Remarks
Allows data transfer from the unit
to the USB-connected device.
Allows data transfer from the
USB-connected device to the
unit.
Sets the unit to the mode
selected through the PC MODE
SELECT menu option.
Disables the PC MODE for
normal operation.

OPTION MODE

Items/ Adjustable
Data Saved Range
ACCESS LED OFF Specify whether or not to enable the P2
SLOT SIDE
card access LEDs.
LCD SIDE
OFF:
BOTH
SLOT SIDE:
LCD SIDE:
BOTH: Enables both LEDs above the
– C U F –
Select whether or not to hold the UMID
P.OFF GPS HOLD
DATA CLEAR
GPS position information while the
power is turned off, thereby keeping this
information as status data holding the
previous value until the power is turned
on again, which enables a new
measurement to start.
HOLD: Hold and save the data.
CLEAR: Clear the data when the power is
– C U F –
Used to specify whether or not to output
SDI METADATA ON
OFF
metadata (UMID) to HD SDI.
– C U F –
SAVE SW (AUD ON Select whether or not to forcibly disable
OUT) OFF
the audio output when the SAVE ON/
OFF switch is set to [ON].
ON:
OFF:
– C U F –
SAVE SW (LCD) ON Select whether or not to automatically
OFF
turn off the LCD monitor when the SAVE
ON/OFF switch is set to [ON].
ON:
OFF:
– C U F –
Menu: Menu Description Tables
Remarks
Disables both LEDs above the
slots and on the side panel.
Enables the LED above the slots
and disables the LED on the side
panel.
Enables the LED on the side
panel and disables the LED
above the slots.
slots and on the side panel.
turned off, and save zero (No-
Info) from the next power-on
until a new measurement is
completed.
Disable audio output.
Enable audio output.
Turn off LCD monitor.
Do not turn off LCD monitor.
171